These machines point the ends of the tubes which are clamped in Draw Benches for pulling the tubes through the drawing dies and plugs. Unlike other methods of pointing here the tube elongates thus allowing a considerable material saving. The points are concentric and straight and the length can be infinitely variable depending upon the pulling force of the Draw Bench. At the shoulder, the point thickens, hence it is very strong and rarely breaks during drawing, improving draw bench yields.

The hydraulically operated Push Pointing Machine considerably reduces raw material wastage. The machine is controlled by PLC. MMI enables control on pointing length. The machine is also capable of Nozzeling the point from 50 to 75 mm. This machine is supplied along with a suitable handling system. The machine office many advantages over the conventional swaging/squeeze operations.