Hydraulic presses

Hydraulic Press manufactured from high grade raw materials and latest technology under the guidance of skilled professionals. Our esteemed patrons can avail from us both automatic and semi-automatic machines as per their requirements. Our esteemed patrons can avail from us both automatic and semi-automatic machines as per their requirements. This Hydraulic Press is used for various applications such as power metallurgy, sheet metal working and for forging industry.

H Frame Press-400T :

The H-Frame Press is a machine powered by high pressure fluid and used for working of materials by pressure. The Hydraulic press depends on Pascal’s principle - “The pressure throughout a closed system is constant”. The force is developed by a piston of a working cylinder to which fluid (water or oil) under high pressure is admitted. The piston in turn is connected to the working tool.

The Hydraulic press maybe driven by a pump or a pump accumulator station with steam, air, hydraulic or electromechanical actuation. Our following hydraulic press is having three basic operation.

• Feeding

• Pressing

• Ejection

Feeding unit : The Feeding unit having two feed cylinders and a roller conveyor to feed the mould to the center pressing area of the press.

Pressing unit : The Pressing unit having a massive 400T cylinder mounted at the top plate of the press guided with linear guide system does the job by compressing the mould with suitable temperature for specified time.

Ejection unit : The Ejection unit having an ejection cylinder mounted below the bed plate of the press ejects the job. Thus the cycle continues and the machine manufactures the components with ease.

Specification

Main cylinder tonnage 400T.
Feed cylinder tonnage 10T.
Working pressure 150 Bar.
Table size 1650 x 1650mm.
Daylight of the press 1000mm.
Oil tank capacity 500liters
Motor H.P 20H.P
Pump flow 100+10Lpm.
Mode of operation Manual/Push button/PLC.

Applications

This machine is specially designed formoulding application. It moulds the component with the massive load of 400T.

Compactor

Compactor is a kind of H type Hydraulic Press. It is used to compress drum into 1/5th of its original size. The drum consists of harmful radioactive materials. The size of the drum is Ø860 x 882 height made of mild steel sheet. The main pressing cylinder creates 200tons of load with the working pressure of 200Bar and compresses the drum.

While pressing there should not be any leakage of harmful gases/liquids. The Compactor is making a sealed atmosphere while pressing. With the use of Blower and Damper which is having HEPA Filter, this machine assures safety. Thus this machine provides a secure compression and disposal of nuclear wastes.

Specification

Main cylinder Tonnage 200T.
Working pressure 200 Bar.
Table size 1000x1000mm.
Daylight of the press 1200mm.
Inlet Conveyor length 2000mm.
Outlet Conveyor length 1000mm
Oil tank capacity 800liters
Motor H.P 30H.P.
Double vane pump 228+53Lpm.
Mode of operation Manual/Push button/PLC.

C Frame Hydraulic Press

We are a leading and well recognized name in the field of offering C frame Hydraulic Presses. Finding applications in areas like Embossing, Punching, Piercing, Straightening and others, these C frame hydraulic presses can be made available up to 200 ton capacity with standard dimensions. Further, these C frame hydraulic presses can also be made available with optional features as per customer’s request.

FEATURES :

• Superior flexibility because of short retooling time.

• Lower maintenance.

• Longer service life standards through use of maintenance-free bearing surface

• Faster and precise RAM guides

• Low noise level

• Integrated RAM positioning sensors

• Possibility of mounting in any positions

Having ample throat and open sides, these presses provide easy access to die from three sides as well as permit loading and unloading of wide and irregular work pieces. For high-speed production, these presses can also be equipped with

• Removable bolsters

• Die cushion

• Automatic feeding

• Material handling systems

• Material handling systems

Application

• Riveting

• Embossing

• Punching

• Straightening

• Stamping

• Crimping

• Assembling

Rubber Moulding Hydraulic Press

Rubber Moulding Hydraulic Press is used to amplify production, save manpower, rejection time & space, improve quality and electric power. The range of moulding press is perfect for product consistency as it gives excellent surface finish, low & high automation capabilities and dimensional stability. These moulding presses can be operated manually as well as automatically. Known for high performance, quality, durability and efficiency, these presses are highly demanded for Rubber moulding products.

Hydropower offers Compression Moulding Hydraulic Presses in Single station and in Multi-Station systems operating with one common power pack. All these moulding presses are provided with individual zone controllers and are offered along with temperature controlled heated platens for independently heated tools.

We design moulding presses according to customer requirements. One of the typical customized hot press is mentioned below:

FEATURES :

• High productivity at Lower operating cost

• Multi Station Presses operating with One common power pack.

• User Friendly operation.

• Seals of Reliable brands used.

• Reliable operation and Low maintenance.

• High Grade Quality Plates used.

• Alloy Chilled Rams duly grinded

• Steam or Electric or Thermal Oil Heating system.

• Auto Bumping System to release unwanted air trapped during curing process.

• High Quality and Reputed Brand make Electric and Hydraulic components.

• Sequence of Auto Operation controlled through Standard Panel and PLC also available optionally.

• Equipped with Alarm and Safety Systems

Specification

Capacity 1200 Ton.
Working pressure 250 Bar.
Table size 1650X1650mm .
Daylight 600mm.
Type of press 4 Pillar, Up stroking.
Working Temperature 140-180°c
Timer Capacity 60 MINUTES
Ram stroke 500mm.
Platen Return Pull back cylinder.
Mode of operation By push button/ PLC.
Oil tank capacity 1200 Liters.
Low pressure pump 260 LPM OUTPUT AT 30 BAR.
High pressure pump 10 LPM AT 250 BAR.
Electric Motor 25 H.P, 1450 Rpm, 3Phase.

Specification

• Auto Parts Moulding.

• Oil Seal Moulding.

• Hot Water Bag Moulding.

• O Ring Moulding.

• Rubber Bushes Moulding.

• Engine Rubber Mountings Moulding.

• Rubber Sheets, Washers, Springs and many rubber parts Moulding.

Enquiry Now